| Mike sanded the tailgate, removed some dents and used an Eastwood shirker to straighten the edges of the tailgate. John sanded the bed sidewalls and used a body hammer and dolly to remove dings previously created when loads shifted in the back of the truck. Eric sanded the truck body. Bill cut out some rusted sections from the top of the passenger fender and bottom of the drivers fender; then he fabricated and welded in some metal patch panels (see detailed pictures of the rust repair). | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|