
![]() TMC members stripped the 2001 Give Away Car. The car was sent to Fox Auto Repair back in November 2000. |
![]() Wayne Hoferkamp and many other club members help strip the parts car, which cars will be used on the 2001 Give Away Car. |
![]() The car was primed and sanded. Several auto techs worked on the car while it was at Fox Auto Repair. |
![]() The 2001 Give Away Car starts it new paint job by first starting to paint all the trim. All quarters trunk etc. was placed back on the car. |
![]() As you can see the firewall really turned out nice. Then new paint in the engine bay area will make this car come alive. |
![]() The paint was applied to the car. The front view of the car gives you a taste of what is coming down the road in your rear view mirror. |
![]() With the body style of the 1965 Barracuda. You can see the round curves or the rear as well as the big rear window housing. |
![]() The other side of the car will give you a different feel for the paint. This looks more silver then the other side. |
![]() Ready to be put back together. There will still be a lot more work to be done in putting the car back together. |
![]() Bill Laurent Starts polishing the rear bumper. The bumpers turned out really nice, until we can swap them out at a national event. |
![]() Thom Day worked hard on shinning the chrome up on the windows. This wing goes on the right side of the car. |
![]() Kevin Beard points out the nice emblem on the front of the car. He says "Win this 1965 Plymouth Barracuda". |
![]() We took the car outside to take some pictures for magazines and show flyers. The Metallic Pewter paint looks silver front this view. |
![]() Here's another view of the front of the car from the right side. With all the chrome on the car. The Pewter paint really looks good. |
![]() From this picture you can start seeing a light bronze paint in the Pewter. The car will now under go a lift in the garage. |
![]() The pewter turns to bronze in this view. From the rear view. It kinda looks like a fish? Well at least a barracuda fish! |
![]() The chains were riged up and the lift will soon begin. |
![]() Here we go! 4 people took 4 pullies and at the same time started lifting the car from the ground. |
![]() Once in the air. Club members inspect the car to see what needs to be done. |
![]() They decided to take the whole chassy out from underneith the car and replace with better one. |
![]() Bill Laurent takes off the tires, while it is in the air. This picture also shows the nice stripes on the car. |
![]() Here's a shot of the Give-Away Car that shows all the chassies were removed. |